|Place of Origin:||CHINA|
|Minimum Order Quantity:||1|
Intelligent Watch CE RED test project REDEU command and on May 22, 2014, the European Union official, take effect after 20 days, the transition period for two years, June 13, 2016, the original R&TTE directive 1999/5 / EC was abolished, and according to the old instruction evaluation of products can continue to sell to June 13, 2017. On June 13, 2017, the European Union on the market only allow the sale of wireless devices in accordance with the new REDEU assessment.
Under the new instructions, the definition of "radio" refers to the special issue and/or receive radio waves used for radio communications and/or radio determination of electrical or electronic products; Or a special and/or receives the radio waves used for radio communications and/or radio determination, and shall cooperate with and other accessories can only be used in electrical or electronic products.
Machine, remote control, radio, for example, com, and radio equipment used for radio and television broadcasting regulation by the new instruction. In addition, the new instruction will apply to the following 9 kHz frequency (in kHz) radio equipment.
New instructions designed to ensure that the eu market in the radio equipment can meet the following requirements:
1. The height for human health and safety protection
2. There is plenty of electromagnetic compatibility
3. The effective use of radio spectrum
4. To avoid harmful interference
The European Union CE certification:
Wireless products are exported to the eu is now need to do CE - RED certification mandatory, on May 14, 2014, the eu introduced new radio equipment directive RadioEquipmentDirective (RED) to replace the original radio and telecommunications terminal equipment
RE order take effect time is on June 12, 2014, each member instruction execution time for beginning on June 12, 2016. On May 14, 2014, eu introduced new radio equipment directive RadioEquipmentDirective (RED)
Replace the original radio and telecommunications terminal equipment (R&TTE) directive. RE order take effect time is on June 12, 2014, each member instruction execution time for beginning on June 12, 2016.
RED product certification scope
1 (SRD), short distance wireless remote control products such as: remote control toy car, remote control alarm system, remote control doorbell, remote control switches, remote control mouse, keyboard, etc.
2 (PMR), professional wireless remote control products such as: professional wireless walkie-talkie, wireless microphone, etc.
3, wireless phone CTO, CT1, CT1 +...
4, ISDN (digital telephone products)
5, DECT (enhanced digital wireless phone)
6, mobile phones, GSM, CDMA testing
7, bluetooth products such as: bluetooth headset.
8, working frequency < 9 kHz inductive data transmission equipment.
9, radio receiver device
In the new wireless equipment instructions (RED) and the significant difference between the old R&TTE directive are:
1, RED product range includes only the wireless communications and wireless identification equipment (such as RFID, radar, mobile detection, etc.). Radio equipment is not used for communication or recognition in electromagnetic compatibility EMC directive LVD directive and low voltage control;
2, cable communications terminal equipment (TTE) have been removed, so the RED instruction is used only for wireless products;
3, radio receiver is now into the scope of the RED instructions (before cover in electromagnetic compatibility EMC directive LVD directive) and low voltage;
4, instructions covering the cut-off frequency has been cancelled (R&TTE controls before starting frequency is 9 kHz), and the limit is still 3000 GHz;
5, notified body assessment has been replaced by "type of inspection certificate";
6, manufacturers only after its quality system by notified body evaluation, to use of the number of the notified body CE mark (full quality assurance - type H);
7, 2 kinds of equipment to countries notice requirements is no longer needed spectrum institutions;
Number 8, 2 kinds of equipment identification (warning) is no longer needed, but limited in some countries use warning still need to appear on the product packaging;
9, no longer need to appear in the user manual, CE mark, but must indicate the frequency of the radio frequency to use in the manual and transmission power;
10, personal assessment with suite will no longer be controlled (i.e., don't need to do a RED certification);
11, the new directive requires the use of unified charger,
12, address and contact the manufacturer and exporters of must appear on the device, and can appear in the user manual when the device is too small.
RED test project
1, the electromagnetic compatibility (EMC testing)
2, safety test LVD (new instruction, for the battery input RF products, also called for the test)
3, according to the European ETSI standard radio communications equipment test (RF test)
4, Europe allow spectrum information announcement (Notification)
5, CTR (TBR) test
6, electrical safety and health protection test (SAR evaluation)
CE certification application process
Step 1: apply for Application
1. Fill out the application form
Table 2. The applicant company information
3. The product information provided EMC (circuit diagram + manual)
LVD: circuit diagram + description + B.O.M + Label (plaque) certificate + motor + + + PCB diagram element (depending on the product), such as transformer specification
4. EMC products need one or two. EMC and LVD products need 3-4
Step 2: offer a Quotation
According to the information provided by the test standard, test time and the corresponding costs
Step 3: Pay payment
After the applicant confirm quotation, initiate the application form and the service agreement and pay the full program fee
Step 4: Testing Testing
Laboratories in accordance with the relevant European testing standards for products for a full range of testing and related test models of differences
Step 5: test pass, report to complete
Step 6: the project is completed, the CE certificate